News

Latitude for Days - D9 DynamicChrome vs. E6 Dynamic-Range

Posted by CineStill on

D9 “DynamicChrome” Warm-Tone Dynamic 1st Developer renders approximately 9+ stops of usable dynamic-range while maintaining rich warm-tones and vibrant color-contrast with preserved highlight and shadow detail (optimized for scanning) for a more cinematic look. Mixed stock solution can be measured out at 1/2 the tank capacity and diluted 1+1 with water to make a working solution for normal warm-tone development. Dilute 1+2 or 1+3 with water for further preserved highlight detail and a more neutral-tone daylight color balance.

But is extending the dynamic range of slides really possible? Of course! That's why we are so excited. When a piece of emulsion is struck by light, trace amounts of silver harden. It would take an insane amount of overexposure to reach the maximum density of the emulsion. But in order to make the hardened silver visible it needs to be amplified with a developer. If you develop it past the Dmax of the film you will lose detail. The key is to slow down development in the highlights while developing the shadows enough to be visible. While it is difficult to increase the shadow detail that is exposed below the base fog of the film, without eliminating it's beautiful inky blacks, we have harnessed the highlight latitude of slide film beyond imagination.

We bracketed exposures by 2 stops under to show how many stops of additional dynamic-range are retained in the highlights. Snip tests were made and processed in each D9 dilution at 104ºf and the remaining 2 Cs6 baths at ~85-100ºf in a Patterson tank. The remaining film was sent to The Darkroom photo lab and processed with the 6-bath E-6 process. The Darkroom specializes in professional film developing and scanning. Their Sitte Tischer TruTrak dip & dunk processor maintains high professional standards with constant process control standards. All frames were scanned on the Skier Sunray Box with a Canon 5D mk2 with all the same settings and corrections.

E-6 Dynamic-Range vs. D9 DynamicChrome

Kodak Ektachrome E100 with an Olympus Zuiko 50mm at f/8 bracketed 2 stops.

D9 DynamicChrome Dilutions Comparison

Kodak Ektachrome E100 with an Olympus Zuiko 50mm at f/8 bracketed 2 stops.

...

Read more →






#CineStillDevDays Part 6 - CS6: Ask us anything! Friday 4PM PST on Instagram Live

Posted by CineStill on

It's time for another #CineStillDevDays! We're so excited to have our new Cinestill Cs6 "Creative Slide"E6 kit out in the wild, we can't wait to see what you all make with it! We're going live on Friday May 22nd, 4pm PST on Instagram Live for a CineStill Cs6 specific AMA!

Read more →






Introducing: Cs6 “Creative Slide” 3-Bath process for color-timing E-6 reversal film at home!

Posted by CineStill on

Slide film is ageless. For years, photographers have loaded it into their cameras and have created memories that they can view, positive images on strips of film, that could be mounted and projected in all its glory. Then, it all but vanished. Until Kodak brought back the enchanting E100 yet again, reigniting the passion for positive.

We are proud to introduce our new Cs6 “Creative Slide” 3-Bath Process for color-timing E-6 reversal film, creating three new distinct slide film results - the true wonder of slide film unlocked. This process illuminates unique color profiles never before seen on slide film, effectively turning the tried and true standard into 3 totally different films.

You already have E100. But what about E100T? With TungstenChrome, you have the ability to tap into the cinematic rich tones of tungsten-balanced photography, now brought to life in Positive. Processing with DaylightChrome yields the conventional standard you’d expect to see from the legendary positive film. And finally, processing with DynamicChrome, unlocks peerless detail, warmth, and dynamic range.

Read more →






#CineStillDevDays - Recap Videos now on IGTV!

Posted by CineStill on

Hey there everyone! Hope you're staying safe and well!

We’ve had a lot of fun with our #CineStillDevDays Live streams. So much fun, that we want to make sure those of you who missed out on catching them live, still get to enjoy them!

We’ll be posting our previous #CineStillDevDays as 15 minute re-cap episodes on Instagram TV. So head on over to our Instagram, follow us if you haven't already (@CineStillFilm), and start watching!

Stay safe, stay home, and shoot film!

Read more →






CineStill Dev Days #5 - 5pm PST, Saturday May 2nd on Instagram Live!

Posted by CineStill on

We'll be going live once again this week on Instagram Live at 5pm PST on Saturday May 2nd for #CineStillDevDays Part 5! On this installment, we're going back to basics and processing some film! Don't Miss out!

Read more →






Introducing: Negative Supply - Camera Scanning System for Digitizing Film at Home

Posted by CineStill on

It's no secret we love the do-it-yourself approach to analog photography. In a way, it's how CineStill was born in the first place! That core mindset motivated our exploration into the simplification of the at-home processing experience, through products such as our Cs41 Color simplified kits, our TCS-1000 Immersion circulator, and our Df96 Black and White Monobath solution.

In recent years other analog companies have surfaced with the similar goals, Ars-Imago with their LAB-BOX film processing tank for instance, proving that even after more than a hundred years, there is always still room to grow in the analog industry.

As film shooting and home-development continue to establish themselves in the mainstream of creative expression, there still yet remains a few hurdles to overcome for the intrepid "do-it-yourselfer" - primarily, what to do with the negatives once you've processed them at home.

Enter Negative Supply. With their precise approach to design and engineering, they seek to transform the camera-scanning method (from one that feels less like a jury-rigged amalgamation of items home-scanners were forced to assemble in the past) into a clean and concise experience for the end user. After having a chance to test the system ourselves, we knew it would be a great fit alongside our other analog offerings. Order the full range of Negative Supply products today!

Read more →






CineStill Dev Days Part 3! - 50D Push Processing!

Posted by CineStill on

Hi there folks!

This week, we've got something planned for all of our fine-grain loving, sun-soaking, 50D lovers out there!

 

Image by Ethan Gully, Shot on 50Daylight 120
Image by Ethan Gully, Shot on 50Daylight 120

#CineStillDevDays part 3 is on it's way, 5:30pm PST this Friday, April 10th on Instagram Live! But First, a hearty "Thank You" to all who tuned in last Friday! Your support means so much to us!

Read more →






CineStill Dev Days Part 2! - 6pm PST on Instagram Live, FRIDAY APRIL 3rd

Posted by CineStill on

Join us at the same time, same place - 6pm PST on Instagram Live, FRIDAY APRIL 3rd- for our second Cinestill Dev Day! This time, we'll be doing a live walk-through of the LAB-BOX 35mm Module, DF-96 Monobath, and will be processing a roll of BwXX. Live and on the air!

Read more →